Specifications

22
Figure 26- NFS server configuration menu
Enable A Compact-flash Card
The compact-flash card must be installed and configured on the SERIMUX before it can be used for system logging or storing
SERIMUX configuration information. See Adding a Compact-flash Card on page 11.
Enable SERIMUX Memory
The SERIMUX memory is already enabled for port logging and only needs to be configured for system or port logging. See
Configuring System Logging Services (next section).
Configuring System Logging Services
To configure the SERIMUX for system logging, do the following:
1. Access the web interface.
2. Under System status and log, choose System logging.
3. Choose Enabled for System logging and the log buffer size.
4. From the System log storage location, choose the location you want from the drop down menu. The choices available are
dependent on what has been enabled and/or installed. The SERIMUX memory choice is always available.
5. Choose to enable or disable email alerts and the number of log messages to send. The default value is 5 seconds for the delay
in log email messages.
6. Enter the contact person’s email address.
7. Choose Save & apply.