Specifications

14
Adding a Wireless LAN Card
To install and configure a wireless LAN card on the SERIMUX, do the following.
1. Insert the card into the PC slot.
2. Access the web interface.
3. Under the PC card heading, choose Configuration.
4. Choose Discover a new card.
The SERIMUX searches for the PC card and displays a configuration menu.
5. Enter the appropriate parameters in the configuration menu.
WEP is the acronym for Wired Equivalent Privacy and is a security protocol for wireless LANs using encryption to protect data
transfers. If you are unsure of the settings for the wireless card, see your network administrator.
• SSID: Stands for Set Service Identifier and is the name of the wireless LAN network
• Use WEP key: The options are to enable or disable the WEP key
• WEP mode: Select the mode, either encrypted or unencrypted
• WEP key length: The options are 40 or 128 bits if the WEP key is enabled
• WEP key string: Refer to the wireless network administrator for the wireless encryption key string
6. Choose Save & apply.
Figure 14- Configure a Wireless Network PC card