Specifications
6
For WINDOWS NT 4.00 INSTALLATION
Check that your PCMCIA device setting is selected for boot and started. Go
to: Start-Settings-Control Panel and double-click the Devices icon. Scroll
down to the Pcmcia listing and highlight it by clicking once. If the PCMCIA
device is set correctly, you should see the screen below.
If the Pcmcia device is not set to boot and started, click once on the Startup
button. Select boot and click the OK button. Close the Devices window and
restart Windows NT before proceeding to the installation section
Check that COM 2 is available for the modem to use. COM 2 is the preferred
COM Port for a Windows NT installation. It is recommended that you dis-
able COM2 through your System BIOS Setup routine (read your Computers
User Manual for instructions on how to invoke the BIOS Setup). Once inside
the BIOS Setup, look for a section called Integrated Peripherals. Locate the
entry for COM 2 or COM Port B and disable it. Save your settings before
exiting.