Specifications

S36 = 4, 6 LPAM, MNP, or hangup MNP or hangup

S36 = 5, 7 LAPM, MNP, or async MNP or async

S89 Timer to Control Sleep Mode

This command displays the number of seconds of inactivity (no characters sent

from the DTE, no RING) in the off-line command state before the modem places

itself into standby mode. A value of zero prevents standby mode.

Note: If a number between 1 and 4 is entered for this register, it will set the value

to 5, and the inactivity before standby will be 5 seconds. This is done for compat-

ibility with previous products which allowed time-outs down to 1 s.

Range: 0, 5-255

Default: 10

S90 Local Phone Status

This register tells the status of the local phone. It is read only.

0 = local phone on-hook

1 = local phone off-hook

S91 Line Transmit Level

This register is effective only for Japan. It specifies the line transmit level in dB

with an implied minus sign.

Range: 6-15

Default: 15

Units: 1 dB

S92 Direct Connect Transmit Level (default 20)

Sets the transmit level, in dBm for direct connect. This value may have different

settings for different phones.

S109 K56flex and V.90 Selection (default 1)

Use this register to disable 56K connections or to choose between K56flex and

V.90 protocols. The default setting (S109=1) will attempt K56flex first, then V.90,

and then V.34 depending upon the central site modem being called and your phone

line conditions. (see the next page for listing.)