Specifications

33
Busy Tone Detect
Disabled: The modem ignores any busy tones it receives.
Enabled: The modem monitors for busy tones.
Ext. Result Code Dial Tone Detect Busy Tone Detect
X0 Disable Disable Disable
X1 Enable Disable Disable
X2 Enable Enable Disable
X3 Enable Disable Enable
X4 Enable Enable Enable (default)
X5 Enable Enable Enable
X6 Enable Enable Enable
X7 Disable Enable Enable
Result Codes:
OK n = 0, 1, 2, 3, 4, 5, 6, 7
ERROR Otherwise
Yn Long Space Disconnect
Long space disconnect is always disabled.
Y0: Disable long space disconnect (default).
Y1: Enable long space disconnect. (NOT SUPPORTED)
Result Codes:
OK n = 0
ERROR Otherwise
Zn Recall Stored Profile
This command instructs the modem chip set to go on-hook and restore the profile
saved by the last &W command. Either Z0 or Z1 restores the same single profile.
Result Codes:
OK n = 0, 1
ERROR Otherwise