Specifications

If you have correctly typed these statements in, you should now be back at

the Windows Desktop. It is important that you do not reboot or restart the

system at this time. Instead, insert your DataLink V.90 Fax Modem into

the computer and perform the installation using the files provided with the

modem (See the Installing the Modem, Windows 95 section). After you

have finished the installation, return here and follow these very impor-

tant steps. Go to Start-Programs and select MS-DOS Prompt. At the

c:> prompt, type in the following commands in the order listed:

cd c:\windows\inf <enter>

rename oem0.inf oem20.inf

rename *.bak *.inf <enter>

exit <enter>

If everything has been entered and no errors have been issued, your mo-

dem and system will be properly configured and ready to use. This proce-

dure renames all of the .inf files in Windows, basically removing them

from the system. This allows you to install the modem and force Windows

to accept the installation files you provide. After the modem has installed,

you then rename all of the .inf files to their proper file extension so that

the hardware they control can be used by the system. This is a compli-

cated but safe procedure if carried out according to the instructions.

Windows 95 OSR2

Eject the modem from the computer and go to Start-Settings-Control

Panel. Double-click the Modems icon. Highlight the modem by clicking

once and then click the Remove button. Close the control panel and return

to the desktop screen. Do not reboot or restart the system. Now go to

Start-Programs and select MS-DOS Prompt. At the c:> prompt, type in

the following commands in the order listed (Note: if you have renamed

your Windows Directory from C:\Windows, substitute the new name for

Windows in the commands that follow.):