Owner's Manual

31
Chapter 5 Configuring for Other Services / Applications
" Note: HIDs usually have a button, which is sometimes diffi-
cult to find, that must be pressed before other Bluetooth
devices can locate the HID. Even after the button is pressed,
the HID can only be discovered for a limited time, and then
the button must be pressed again. The time period can be as
short as 30 seconds or as long as 180 seconds. Read the docu-
mentation that accompanies the HID before you attempt to
connect to the device.
Close an HID connection
Under normal circumstances, there is no reason to close an
HID connection; once established the connection is main-
tained automatically, even during the power off and power on
processes. If, for some reason, the connection must be closed:
from My Bluetooth Places, right-click the service name and
select Disconnect.
When an HID connection is closed manually by the operator,
the connection’s “persistence” is broken. The connection must
be re-established manually, after which theconnection will
again persist until broken manually.
Configure
No configuration is necessary.
5.5.4 Audio Gateway
The Audio Gateway Application allows a remote Bluetooth device to
use the Bluetooth-enabled computer’s microphone and speakers as the
remote device’s audio input and output devices.
• Open a connection to the Audio Gateway service that is provided by
another Bluetooth device by right-clicking the Bluetooth icon in the
Windows system tray. Select Quick Connect, and select Audio
Gateway followed by Device. Select the device you want from the
window.