User manual

70
Actiontec Broadband Router User Manual
71
Chapter 5 Configuring the Router’s Security
Security Log Settings
To view or change the security log settings:
1. Click Settings in the Security Log screen. The “Security Log Settings” screen
appears.
2. Select the type of activities that will generate a log message:
• Accepted Incoming Connections - activating this check box generates a
log message for each successful attempt to establish an inbound connection
to the local network.
• Accepted Outgoing Connections - activating this check box generates a
log message for each successful attempt to establish an outgoing connection
to the public network.
3. Select the type of blocked events to be listed in the log:
• All Blocked Connection Attempts - activating this check box generates
log messages for all blocked events.
• Other Blocked Events - if “All Blocked Connection Attempts” is un-
checked, select specific blocked events from this list to generate log messages.