User manual

8
Actiontec Broadband Router User Manual
9
Chapter 2 Connecting the Router
6. Make sure the computer is powered on, then plug the other end of the yellow
Ethernet cable into an Ethernet port on the computer.
7. Make sure at least one of the Ethernet LAN lights on the front of the Router
glows steadily green. This may take a few moments.
8. Get the white Ethernet cable from the box and plug one end in the white port
on the back of the Router.
9. Plug the other end of the white Ethernet cable into the high-speed Ethernet
jack.
10. Make sure the WAN light on the front of the Router glows steadily green.
☞
Note: If the WAN light does not illuminate, make sure the
Ethernet cable is connected properly at both ends.
Configuring the Router
1. Open a web browser on the computer connected to the Router. In the
“Address” text box, type:
http://192.168.1.1
then press Enter on the keyboard.
2. The “Login” screen appears. Enter the default user name (admin) and pass-
word (password) in the appropriate text boxes, then click OK.