Owner's Manual

Power Input

Connect the supplied power adapter here.

MIC In

If required, an external microphone can be attached here. Attaching

a microphone here will disable the built-in microphone on the front.

Microphones designed for use with computers are usually

compatible with this microphone input.

LAN port

Use a standard LAN cable to connect your Camera to a

10/100BaseT hub or switch.

Note:

Attaching the LAN cable to the Camera disables the wireless

interface. Only one interface can be active at any time.

Reset Button

This button has two functions:

• Restore Default IP Address - When pressed and released, the

Camera’s IP address will be automatically obtained from the

DHCP server.

• Restore Default IP Address, Administrator ID, and

Administrator password - When pressed and held for three

seconds, the IP Address, Administrator ID, and Administrator

Password settings will be set to their default values.

• IP Address: automatically obtained from the DHCP server

• Administrator ID: administrator

• Administrator Password: null (no password)

Note: After this procedure is completed, the Ready LED will blink

three times to confirm that the reset was completed successfully.