Manualshelf

Owner's Manual

ManualsBrandsActiontec ManualsWirelessActiontec 802NCG
31323334353637383940
WPA-PSK Screen
This screen is accessed by clicking Configure on the Network screen and selecting WPA-PSK
from the “Security System” menu. An example WPA-PSK screen is shown below.
Figure 27: WPA-PSK Screen
Data – WPA-PSK Screen
WEP Encryption
WPA-PSK
Encryption
Select the option used on your wireless LAN.
• TKIP- Stands for “Temporal Key Integrity Protocol” and is a
security protocol for wireless networks. This is the default setting,
and the only one currently available.
WPA Shared
Key
Enter a case-sensitive alphanumeric key (from 8 to 63 characters in
length) here. If the Camera is connected to an access point or
gateway/router, enter the same pre-shared key as the device.
Image Screen
This screen is displayed by clicking Image.
Figure 28: Image Screen
32