Owner's Manual

9
2. The next screen lists all of the Cameras on your LAN.
Figure 5: Camera List Screen
• Select the desired Camera from the list on the left. The current settings for the selected
Camera will be displayed in the table on the right.
• Click Next to continue.
3. You will be prompted for an administrator name and password.
• If using the default values, enter administrator for the name, and leave the password
blank.
• Otherwise, enter the Administrator ID and Password you previously set on the User
screen.
Figure 6: Password Dialog
The Administrator ID and password can be set on the User
screen of the Web interface. The Web interface can be
accessed by clicking Web UI on the final screen of the
Wizard.