User guide

40Section 3: Additional Features
BT Telecommunications PLC 2003-2005
Wireless Zero Configuration Service
The Wireless Zero Configuration Service (WZCSVC) is only found in Windows XP, and is used by
Windows to control WiFi cards. It is automatically detected by
BT I-Connect
and is disabled on the
launch of the first WiFi profile. It is restored when the client is closed down.
Back up
3.5 Session Timer
BT I-Connect
features a session timer that automatically disconnects an active connection after it
has been active for a set period of time. The exact functionality depends on how your profile's
Session Timer Period
and
Session Timer Warning
entries are configured.
Profile entry
Session Timer Period
controls how long in minutes a connection will be
maintained, for example setting it to '240' will cause the automatic disconnection to occur four
hours after the connection was established. Note that the maximum value this can be set to is
20160, which equates to fourteen days (14 days x 24 hours x 60 minutes).
Entry
Session Timer Warning
specifies if a warning is to be displayed prior to the automatic
disconnection, with the value determining how long in minutes the warning is displayed before the
disconnection. For example, setting it to '5' will display the warning five minutes before
disconnection.
The warning prompts you and gives you the option to extend the session by the length of time
defined in
Session Timer Period
(by clicking
Yes
), or if you would like to let the disconnection
happen (by clicking
No
). Clicking
No
would mean a countdown timer appears in the central
window.
Warning