User`s manual

Product Registration

The installation CD that came with your Actiontec 56K USB Call Waiting Modem

contains a file called registration. This file will take you to the Actiontec web site:

http://www.actiontec.com/registration

Please fill in the required fields so that you can get prompt support and notifica-

tion of periodic product upgrades.

Safety Information

To avoid a shock hazard, do not connect or disconnect any cables or perform

installation, maintenance, or reconfiguration of this product during an electrical

storm. Any equipment to which this product will be attached must also be con-

nected to properly wired receptacles.

When using your telephone equipment basic safety precautions should always be

followed to reduce the risk of fire, electrical shock, and injury to persons, includ-

ing the following:

• Never install telephone jacks in wet locations unless the jack is specifically

designed for wet locations.

• Never touch uninsulated telephone wires or terminals unless the telephone

line has been disconnected at the network interface.

• Use caution when installing or modifying telephone lines.

• Avoid using a telephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electrical shock from lightning.

• Do not use the telephone to report a gas leak in the vicinity of the leak.

Do not connect your modem to a digital PBX system. This may damage the mo-

dem. This modem is designed to function with an analog telephone line, such as a

residential line.

Do not connect your modem to an ISDN line. These lines may damage the mo-

dem.

Please note that this modem is fully compatible with analog telephone lines that

are connected to a Digital Exchange. Digital Exchanges supply analog lines to

homes and businesses in some areas.