User`s manual

Configuring Windows NT 4.0

Step 1 After you have installed the modem into your machine, turn on the power

and allow the system to boot normally.

Step 2 Insert the installation CD-ROM into the computer’s CD-ROM drive. On

the taskbar, click Start. On the start menu, click Run. Type:

x:\drivers\pciven\winnt\setupnt.exe

where x is the letter of your CD-ROM drive, and click the OK button.

Step 3 After the program has finished unpacking the driver and setting it up, a

window like the one below will be displayed.

Step 4 Remove the installation CD-ROM and click Finish to restart your com-

puter.

Step 5 After Windows NT restarts, on the Start menu, click Settings, click Con-

trol Panel, then double-click the Modems icon.