User`s manual

11
Step 5 Next Windows detects a “Wave Device for Voice Modem” and displays the
dialog box shown below. Make sure the option “Driver from disk provided
by hardware manufacturer” is selected, then click the OK button.
Step 6 Next, verify that the modem has been properly installed. On the windows
taskbar, click Start. On the Start menu, click Settings, then click Control
Panel. In Control Panel, double-click the Modems icon. The Modems Prop-
erties dialog box will appear. Click the Diagnostics tab. Click the COM
Port icon next to the Call Waiting modem to select it, then click More Info.
The “ATI” responses should be listed. That this information has been dis-
played means the modem has been correctly installed and is functioning.
Step 7 Turn to the section titled “Configuring Your Modem’s Country Code” for
instructions on how to configure the modem to use the Public Switched
Telephone Network (PSTN) of your country.