Instruction manual

Known Limitations in Release 4.1
296-1011-220 Rel. 4.1, Doc. Rev. 07.02 4-13
Known Problems and Limitations
This occurs on the following platforms:Linux Slackware 4.0, Kernel Version
2.2.12, SunOS 4.1.3_U1, SunOS 4.1.4.
Time Counters
The value returned for the object instance of systemTimeFixedBootTime is the
number of clock ticks since 1/1/1900.
Table Values Difference
CVX switch MIBs that have tables with instances (for example,
systemSummaryTable and systemVersionTable) contain instance values that differ
from the table Index value. These values should be the same.
Ascend-Require-Auth Parameter
The Ascend-Require-Auth parameter is not supported.
The radius trace command displays the Ascend-Require-Auth parameter (sent
from the RADIUS server) as “unknown.” (In the CVX switch, use preauth
radius for tier 2 authentication.)
The CVX switch does not support this parameter because the CVX switch does
not support CLID preauthentication. The functionality of Ascend-Require-Auth is
duplicated by Ascend-Recv-Auth, which the CVX switch does support.
Get Command on Multiple Objects
If you issue an SNMP get command on multiple objects, for example, sysDescr.0
and sysObjectId.0, sysObjectID.0 returns different results depending on whether
you specified it first or not.
If you ask for... ...then... Results
sysDescr.0 sysObjectID.0 the sysObjectId is returned incorrectly.
sysObjectID.0 sysDescr.0 the sysObjectId is returned correctly.