Instruction manual

Known Limitations in Release 4.1

4-12 296-1011-220 Rel. 4.1, Doc. Rev. 07.02

CVX Multi-Service Access Switch 4.1 Release Notes

Session Accounting (CR 139261)

The show session vpop 1 command does not account for all sessions. Although a

session is generated and is accounted for when you execute the show session

table command, the session does not appear as a type “Other” call when you

execute the show session vpop 1 command.

File into Wrong Directories (CR 139269)

Multiple ftp sessions to the CVX switch may result in files from one session going

to the wrong directory.

Also, multiple telnet and/or ftp sessions through the same ip-address may result in

files being placed in the wrong directory.

UDP Checksum (CR 140388)

The CVX switch does not compute a UDP checksum on outgoing packets.

Call_type_override Parameter (CR 145190)

The call_type_override parameter is not supported for X.75 sessions.

Entering Commands Through Vshell

If you use Vshell to enter a command such as ping on the FEP, you cannot use

Ctrl-C to terminate execution of the command. Instead, by pressing Ctrl-C, you

exit the FEP and go back to the BEP.

Telnetting from UNIX Platforms

Example of a Telnet connection to the CVX switch from certain UNIX platforms

causes the following:

Connected to cvx.sample.net.

Escape character is ’^]’.

Nortel Networks CVX-1800

password:

CVX>