Instruction manual

Known Limitations in Release 4.1

296-1011-220 Rel. 4.1, Doc. Rev. 07.02 4-11

Known Problems and Limitations

shelf 1/slot 9/SCC/BIC/T1 1> configure t1_trunkconfig

shelf 1/slot 9/SCC/BIC/T1 1/T1_trunkconfig> commit

shelf 1/slot 9/SCC/BIC/T1 1/T1_trunkconfig> exit

There are outstanding changes to the running configuration: Save

the running configuration as the saved configuration? [Y/N] y

CVX>

Alarm State Indication (CR 139219)

If you set the AdminState of a T3 or of an individual T1 in the T3 to disabled, the

Alarm State displayed by a show ds1 slot n command incorrectly indicates OK

for the disabled T3 or T1.

Accounting Stop Packet (CR 139223)

The Accounting Stop packet functionality should be used specifically for failed

connections that specifically have the user name set to Unknown. The Accounting

Stop functionality has been incorrectly extended to the RADIUS diagnostics

command radius -a, causing the packets to be sent to the RADIUS server with

user names of Unknown.

CVX-SS7-Session-Id-Type (CR 139231)

The CVX-SS7-Session-Id-Type attribute may appear in accounting stop and start

packets.

The Login-Service attribute is implemented only for clearTCP connections. The

attribute shows up in other instances where it has no relevance, such as in regular

PPP calls and L2F/L2TP calls. (For clearTCP connections, the Login-Service

value of 2 (TCP Clear) is correct.)

Trunk Value Counting (CR 139250)

After a fresh reboot of the CVX switch, the show session summary command

displays a Trunk value of 100 percent. When calls are brought into the CVX

switch, the percent value changes, eventually decreasing to 0.