Instruction manual

Known Limitations in Release 4.1
4-10 296-1011-220 Rel. 4.1, Doc. Rev. 07.02
CVX Multi-Service Access Switch 4.1 Release Notes
CLI Path Summary for Setting Frame Relay Parameters for T1 Port 1
CVX> config
CONFIG> configure shelf 1/slot 9/scc/bic/t1 1
shelf 1/slot 9/SCC/BIC/T1 1> configure leasedline
.../BIC/T1 1/LeasedLine> configure virtuallink 1
.../T1 1/LeasedLine/VirtualLink 1> configure frinterface 1
.../VirtualLink 1/FrInterface 1> configure frinterface_config
.../FrInterface 1/FrInterface_config> set frDlcmiLMIType annexd
.../FrInterface 1/FrInterface_config> commit
.../FrInterface 1/FrInterface_config> return
.../VirtualLink 1/FrInterface 1> configure frlogicalif 1
.../FrInterface 1/FrLogicalIF 1> configure frcircuit_config 16
.../FrInterface 1/FrLogicalIF 1/FrCircuit_config 16> return
.../FrInterface 1/FrLogicalIF 1> configure ip_interface
.../FrLogicalIF 1/ip_interface> configure ip_ifnumber
.../FrLogicalIF 1/ip_interface/ip_ifnumber> set if_index 1
.../FrLogicalIF 1/ip_interface/ip_ifnumber> set class protocol
.../FrLogicalIF 1/ip_interface/ip_ifnumber> set subclass fr
.../FrLogicalIF 1/ip_interface/ip_ifnumber> set instance 1
.../FrLogicalIF 1/ip_interface/ip_ifnumber> commit
.../FrLogicalIF 1/ip_interface/ip_ifnumber> return
.../FrLogicalIF 1/ip_interface> configure ip_circuit
.../FrLogicalIF 1/ip_interface/ip_circuit> set if_index 1
.../ip_interface/ip_circuit> set ip_local 134.177.66.21
.../ip_interface/ip_circuit> set ip_mask 255.255.255.0
.../ip_interface/ip_circuit> set inverse_arp_enabled true
.../ip_interface/ip_circuit> commit
.../ip_interface/ip_circuit> return
.../FrInterface 1/FrLogicalIF 1/ip_interface> return
.../FrInterface 1/FrLogicalIF 1> configure frlogicalif_config
.../FrLogicalIF 1/frLogicalIF_config> set frLIFEnable enable
.../FrLogicalIF 1/frLogicalIF_config> commit
.../FrLogicalIF 1/frLogicalIF_config> return
.../VirtualLink 1/FrInterface 1/FrLogicalIF 1> return
.../VirtualLink 1/FrInterface 1> return
.../T1 1/LeasedLine/VirtualLink 1> configure virtuallink_config
.../VirtualLink 1/VirtualLink_config> set ChannelEnable enable
.../VirtualLink 1/VirtualLink_config> commit
.../VirtualLink 1/VirtualLink_config> return
.../T1 1/LeasedLine/VirtualLink 1> return
.../BIC/T1 1/LeasedLine> return