Instruction manual

Known Limitations in Release 4.1
296-1011-220 Rel. 4.1, Doc. Rev. 07.02 4-9
Known Problems and Limitations
7 Enter the configure virtuallink_config command to access the
virtual link parameters.
.../T1 1/LeasedLine/VirtualLink 1> configure
virtuallink_config
8 Set the channelenable command to enable, and then return to the
virtuallink_config object.
.../VirtualLink 1/VirtualLink_config> set
ChannelEnable enable
.../VirtualLink 1/VirtualLink_config> commit
.../VirtualLink 1/VirtualLink_config> return
9 Go back to the T1 level of the CLI hierarchy.
Accept the default settings for the T1_trunkconfig configuration object.
shelf 1/slot 9/SCC/BIC/T1 1> configure
t1_trunkconfig
shelf 1/slot 9/SCC/BIC/T1 1/T1_trunkconfig> commit
shelf 1/slot 9/SCC/BIC/T1 1> exit
There are outstanding changes to the running
configuration: Save the running configuration as the
saved configuration? [Y/N] y
CVX>
Step Action