Instruction manual

Configuration Changes Since Release 4.0
2-18 296-1011-220 Rel. 4.1, Doc. Rev. 07.02
CVX Multi-Service Access Switch 4.1 Release Notes
Example 2- Using the Start/Count Method
.../VPOP 1/ip_pool 1/ip_address_block 1> show
Members currently configured at this level:
start 10.10.10.1
count 4
mask 0.0.0.0
range_in_use false
admin_status enabled
CVX> show routes
Routing table display
IP Routes:
D = default, P = private, I = internal, E = external
D 0.0.0.0/0 cid 1 gw 192.168.1.2 igp static/low 1
10.10.10.0/30 cid 100 igp static/high 1
P 192.168.1.0/24 cid 1 igp local cfg 1