Instruction manual

New Features
2-10 296-1011-220 Rel. 4.1, Doc. Rev. 07.02
CVX Multi-Service Access Switch 4.1 Release Notes
CONFIG> configure system
system> configure ip_services
system/ip_services> configure ip_aaa_remote
../ip_aaa_remote> configure ip_aaa_group 1
/ip_aaa_remote/ip_aaa_group 1> configure ip_aaa_radius_config
../ip_aaa_radius_config> set nas_id hanscvx
../ip_aaa_radius_config> set session_id_style hex
../ip_aaa_radius_config> set session_id_size 32_bit
../ip_aaa_radius_config> commit
../ip_aaa_radius_config> return
../ip_aaa_remote> configure ip_aaa_set 1
../ip_aaa_remote/ip_aaa_set 1> configure ip_aaa_server 1
../ip_aaa_set 1/ip_aaa_server 1> set index 1
../ip_aaa_server 1> set ip_addr 132.245.70.21 ---> CPM address
../ip_aaa_server 1> set ip_port 1645 --> CPM authentication port
../ip_aaa_server 1> set retries 5
../ip_aaa_server 1> set key pw1/7jwat9y
../ip_aaa_server 1> set trace true
../ip_aaa_server 1> commit
../ip_aaa_server 1> return
The following example sets up a CVX VPOP to authenticate using the above
AAA Group:
sessions> configure vpop 1
sessions/vpop 1> configure ppp_modem_config
.../vpop 1/ppp_modem_config> set authserverprotocol1 pap
.../vpop 1/ppp_modem_config> set authserverprotocol2 chap
.../vpop 1/ppp_modem_config> set authclientprotocol1 pap
.../vpop 1/ppp_modem_config> set authclientprotocol2 chap
.../vpop 1/ppp_modem_config> commit
.../vpop 1/ppp_modem_config> return
sessions/vpop 1> configure ppp_isdn_config
.../vpop 1/ppp_isdn_config> set authserverprotocol1 pap
.../vpop 1/ppp_isdn_config> set authserverprotocol2 chap
.../vpop 1/ppp_isdn_config> set authclientprotocol1 pap
.../vpop 1/ppp_isdn_config> set authclientprotocol2 chap
.../vpop 1/ppp_isdn_config> commit
.../vpop 1/ppp_isdn_config> return