Instruction manual

Upgrading to Release 4.1 from Prior Releases
1-14 296-1011-220 Rel. 4.1, Doc. Rev. 07.02
CVX Multi-Service Access Switch 4.1 Release Notes
Note: If the CVX 1800 being upgraded contains a redundant SCC (slot
10), ensure that the CVX switch is running in slot 9 as the SCC master
and the SCC in slot 10 is running as the slave before proceeding. If the
CVX 600 being upgraded contains a redundant SCC (slot 6), ensure that
the CVX switch is running in slot 5 as the SCC master and the SCC in
slot 6 is running as the slave before proceeding. To check this, enter the
following command:
CVX> scc -i
SCC is running in slot 9 as master.
Adjacent SCC detected!