User manual

5
Installation
This chapter describes how to install the Actiontec
54 Mbps Wireless PC Card. Please refer to the appropriate section:
• Microsoft Windows XP users: refer to “Windows XP Installation
Instructions,” below.
• Microsoft Windows 2000users: refer to “Windows 2000 Installation
Instructions” on page 7.
• Microsoft Windows ME users: refer to “Windows ME Installation
Instructions” on page 12.
• Microsoft Windows 98 and 98SE users: refer to “Windows 98 and
98SE Installation Instructions”on page 14.
Windows XP Installation Instructions
To install the Actiontec 54 Mbps Wireless PC Card on a computer running
Microsoft WIndows XP, use the following procedure:
1. Locate an available Type II or Type III PCMCIA CardBus slot on your
computer.
2. Hold the 54 Mbps Wireless PC Card so its 68-pin connector is facing
your computer’s PCMCIA CardBus slot and its label is facing up.
2