User guide

6
Installing the 54 Mbps Wireless PC Card
1. Your computer can be on or off, it will not affect the installation process. Locate an
available Type II or Type III PCMCIA slot on your laptop. If you are not sure where
the slot is, please consult your laptop’s user manual.
2. Insert the Actiontec 54 Mbps Wireless PC Card into the appropriate PCMCIA slot.
Your hardware is now installed.
Installing the 54 Mbps Wireless PC Card
This device complies with Part 15 of FCC Rule., as well as ICES 003 B / NMB
003 B. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesirable operation.
Modifications not expressly authorized by Actiontec Electronics may invalidate
the user's right to operate this equipment.
WARNING!!
While this device is in operation, a separation distance of at least 20 centimeters
must be maintained between the radiating antenna and the body of all persons
exposed to the transmitter in order to meet the FCC RF exposure guidelines.