User manual

20
Actiontec 54 Mbps Wireless PC Card User Manual
21
Chapter 3 Using the Wireless Configuration Utility
Personal Certificate - If “EAP-TLS” was selected in the Protocol section, the
“Personal Certificate” section is active. Select a personal certificate for authenti-
cating the PC Card from here.
Server Certificate - If “EAP-TLS” or “MSCHAP V2 over PEAP” was selected in
the Protocol section, the “Server Certificate” section is active. Clicking in the
“Validate” check box requires the server certificate be validated.
PSK Configuration
If WPA is selected in the Privacy Mode list box, and None is selected in the
Authentication Mode list box, the “PSK Configuration” window appears.
To set up a PSK (Pre-Shared Key):
1. In the “Passphrase” text box, enter the key being shared with wireless network
connection. It will appear in the text box as a series of asterisks. To view the
passphrase, click in the “Unmask” check box.
☞
Note: The passphrase key should be composed of alphanumeric
characters only, and be between 8 to 63 characters long.
2. Click OK.