User manual

12
Actiontec 54 Mbps Wireless PC Card User Manual
13
Chapter 3 Using the Wireless Configuration Utility
Using the Wireless Configuration Utility
After double-clicking on the Wireless Configuration icon, the “Actiontec 54Mbps
Wireless PC Card Utility” window appears.
There are three tabs at the top of the window: Main, Security, and About. To
select a particular tab, click on it. To close the window, click the “x” in the upper
right corner of the window, or click Cancel.
Main
The Main tab (shown in the figure above) gives an overview of the current wire-
less connection. Within this tab, the user can connect to another available wireless
network, scan for additional wireless networks, and modify the settings for the
currently selected network.
Status
The Status text box, at the top of the Main tab, displays the state of the wireless
connection. It can contain one of the following entries:
Driver not loaded - If this entry appears in the Status text box, the PC Card is not
inserted in the laptop, or the driver is not installed.