User manual

4
Actiontec 11Mbps Wireless Access Point User Manual
Access Point Features
The Access Point has a series of LEDs on its front panel, and a series of ports on its
rear panel. It is recommended that the user become familiar with these features
before installing or setting up the Access Point.
Front Panel
There are five LEDs (light emitting diodes) on the front panel of the Access Point,
as shown in the figure, below.
Power LED
The Power LED glows green when power is supplied to the Access Point. When
it blinks, the Access Point is going through its initialization process.
Activity LED
The Activity LED flickers green when the Access Point is sending and/or receiv-
ing data.
Wireless LED
The Wireless LED glows green when the Access Point is ready to start.
LAN LED
The LAN LED glows green when the Access Point is successfully connected to a
LAN (Local Area Network).
Power
Activity
Wireless
LAN
USB