User manual

26
Actiontec 11Mbps Wireless Access Point User Manual
7. In the IP Address tab, activate “Specify an IP Address” by clicking on the cir-
cle. When active, a black dot will appear in the circle. If the circle already con-
tains a black dot, leave it alone.
8. Enter the following numbers in the “IP Address” text box:
192.168.0.2
Don't include the periods; they are automatically entered.
9. Enter the following numbers in the “Subnet mask” text box:
255.255.255.0.
10. Click OK.The TCP/IP Properties window disappears.
11. In the Network window, click OK.The Network window disappears.
12. The “System Settings Change” window appears, asking whether the computer
should be restarted. Click Ye s .
13. The computer restarts. The IP address on the computer is changed.