User manual

Setting Up a Wireless Network
3.6 Setting Up a Wireless Client
3
© 2010 Verizon. All Rights Reserved.
50
Click the connection once to mark it, then click 3. Connect at the bottom of
the screen. The following login window appears, asking for a “Network Key,”
which is the pre-shared key used when configuring the FiOS Router’s WPA
security (see the “WPA” section in this chapter).
Enter the network (WPA) key in both text boxes and click 4. Connect. After
the connection is established, its status will change to “Connected,” as
shown below.
An icon appears in the notification area, announcing the successful initiation
of the wireless connection.
Test the connection by disabling all other connections in the Network 5.
Connections window and surfing the Internet.