User manual

Setting Up a Wireless Network
3.5 Advanced Security Settings
3
© 2010 Verizon. All Rights Reserved.
40
To set up wireless MAC authentication:
Click in the “Enable Access List” check box.1.
Select either “Accept all devices listed below” or “Deny all devices listed 2.
below” by clicking the appropriate radio button. Selecting “Accept…”
causes all devices listed by MAC address to access the FiOS Router’s wireless
network. Selecting “Deny…” causes all listed devices to be denied access.
Enter the MAC address of a device in the “Client MAC address” text box.3.
Click 4. Add.
Repeat steps 3 and 4 to add more devices to the list.5.
When finished listing devices, click 6. Apply.
To remove a MAC address, select it from the “List” list box, then click Remove.
802.11b/g/n Mode
This option allows the user to select the wireless communication standard
compatible with the devices to be connected on the wireless network from the
drop-down list. Options include Compatibility (802.11b, g, and n devices can
connect) Legacy (only 802.11b and g devices can connect), and Performance
(only 802.11n devices can join).