User's Manual

Multiple zControls on Multiple Networks

If there are multiple zControls on multiple networks (for example, one in the home and

another in the office), only the ones on the local network will appear in the list of UPnP

devices, accessible by typing their IP addresses into a browser’s Address field. The

zControl units on other networks are only accessible remotely. To access them:

1. Enter http://www.digitalgardeneronline.com/zControl in a browser’s Address field.

2. A prompt appears, asking for the username and password. Enter the requested

information.

3. Another window appears, with a list of all active zControl units. Click on on one of

the units, then click Select. The UI associated with that unit appears.

4. To access a different zControl unit, open a new browser window and repeat steps 1–3.

Actiontec zControl User Manual