User's Manual

Inspecting Your zControl

1 Inspecting Your zControl

1.1 Inspecting the Ports on Your zControl

Let’s take a look at the back of your zControl to see all of the ports and their uses.

(2) USB ports – reserved for your future USB devices; the USB ports can be used for external, local storage ›

such as an external hard drive or memory stick

Ethernet port – connects the zControl to your network (for example, to an Ethernet hub or directly to your ›

gateway/router) by means of the included Ethernet cable

Reset button – restarts your zControl ›

WARNING: Normal functionality will be interrupted until the zControl has fully restarted

12VDC 1.4A – connects to your power supply ›

1.2 Inspecting the LEDs on Your zControl

You’ll notice several LEDs on the front of your zControl.

These LEDs provide information on the zControl’s status. In general, when you see green,

everything is working correctly. When choosing a location for your zControl, remember to

make sure that the LEDs are easily visible. For more information on the LEDs, consult the

LED matrix on the last page of this manual.