User's Manual

Accessing the Extender’s
Settings
e Extender features an onboard graphical user interface (GUI) that
includes user-congurable settings. Some of these settings should be
accessed by experienced network technicians only.
To congure the network settings of the Extender:
1.
Ensure that the Extender is connected to a gateway/modem’s MoCA
coaxial network, and that both devices are powered on.
2.
On a computer connected to the same network as the gateway/
modem and Extender, log in to the gateway/modem’s GUI. e IP
address for this log in will vary between dierent gateway/modems.
3.
e gateway/modem’s GUI appears. Find the Extender by its MAC
ID from the list of connected devices or status screen. e MAC ID of
the Extender is provided on a sticker located on the rear panel of the
Extender.
4.
Write down the IP address of the Extender.
5.
Enter the IP address written down in step 4 in the address box of the
web browser."
10