User's Manual

8
Telus T3200M Gateway
Coax Port
The Coax port is used to connect the Gateway to a coaxial connection via
coaxial (MoCA) cable.
SFP Cage
The SFP cage is used to connect the Gateway to a service provider connection
via optical fiber cable.
WAN Ethernet Port
The WAN Ethernet port is used to connect the Gateway to a WAN connection
via an Ethernet cable.
LAN Ethernet Ports (4)
The LAN Ethernet ports are used to connect computers to the Gateway via
Ethernet cable. The Ethernet ports are 10/100/1000 Mbps auto-sensing ports,
and either a straight-through or crossover Ethernet cable can be used when con-
necting to the ports.
USB Ports (2)
The USB ports are used to connect the Gateway to a USB device.
DSL Ports (2)
The DSL ports are used to connect the Gateway to a DSL wall outlet via DSL
cable.
VoIP Ports (2)
The VoIP ports are used to connect the Gateway to a telephone or other com-
munication device via phone cable.
WARNING! Do not unplug the Power cord from the Gateway
during the reset process. Doing so may result in permanent damage
to the Gateway.