User's Manual

10
Telus T3200M Gateway
5. Make sure the computer is powered on, then plug the other end of the yel-
low Ethernet cable into an Ethernet port on the computer.
6. Make sure at least the LED on the LAN port into which the Ethernet cable
is plugged steadily green. This may take a few moments.
7. The computer should either be configured with a statically defined IP address
and DNS address, or instructed to automatically obtain an IP address using
the Network DHCP server. The Gateway is set up, by default, with an active
DHCP server, and it is recommended to leave this setting as is.