User's Manual

Introduction

Connecting the Gateway

There are many variables involved when connecting the Gateway, depending on the

type of Internet service available. The figure below shows all of the possible connec-

tions available for the Gateway.

Connecting a Computer to the Gateway

To connect a computer to the Gateway to access the Gateway’s graphical user inter-

face (GUI):

1. Get the Gateway and black Power cord from the box.

2. Plug the black Power cord in the black port on the back of the Gateway and

then into a power outlet.

3. Turn the Gateway on.

4. Plug the yellow Ethernet cable from the box into one of the four yellow

Ethernet ports on the back of the Gateway.