Wireless 11ac Bonded VDSL2 Modem Gateway with MoCA 2.0 Model # T3200M User Guide xxxx-xxxx-000 rev.
Table of Contents Getting Started With the Gateway Package Contents Minimum System Requirements Features Getting to Know the Gateway Connecting the Gateway 4 5 5 5 6 9 Accessing the Home Screen 11 Accessing the Home Screen Icon Bar Connection Status 11 13 13 Checking the Gateway’s Status Accessing the Status Screens Connection Status xDSL Status WAN Ethernet Routing Table Firewall Status NAT Table Wireless Status Modem Utilization LAN Status ARP Table Interface Statistics Multicast Statistics System L
Table of Contents Configuring Firewall Settings Accessing Firewall Settings Firewall IPv6 Firewall Port Forwarding Applications DMZ Hosting IPv6 DMZ Hosting UPnP Advanced Settings Accessing the Advanced Setup Screens Services Blocking Website Blocking Scheduling Access WAN IP Addressing IPv6 WAN Settings LAN IP Settings IPv6 LAN Settings DHCP Reservation Dynamic DNS DNS Host Mapping Port Bridging Admin Password Storage Device Info Samba Configuration Voice Advanced Setting Voice Basic Setting Voice Debug
Table of Contents IPv6 Traceroute Time Zone Language Settings DNS Cache IGMP Setting Upgrade History SIP ALG Tool Box DLNA xDSL Diagnostics User’s Manual 58 59 59 60 60 61 61 62 62 63 63 Specifications 64 General Wireless Operating Range LED Indicators Environmental Notices Regulatory Compliance Notices Modifications GPL (General Public License) iii 64 65 65 65 66 66 66 67
Getting Started With the Gateway 1 Congratulations on purchasing the T3200M Wireless 11ac Bonded VDSL2 Modem Gateway with MoCA 2.0. The Gateway is a single platform device that supports universal WAN access, FTTN, FTTdp, FTTB, or FTTP. With support for advanced 802.11ac 4x4 WiFi and bonded MoCA 2.0, the Gateway enables blazing fast HD video streaming, with multi-channel HD video throughput. The Gateway also offers an unprecedented level of security, helping protect your network resources.
Introduction Package Contents • Black Power adapter • Yellow cable(Ethernet, 6ft.) • White cable (Ethernet, 10ft.) • Quick Start Guide • Installation Guide • Wall-mount template • Vertical stand Minimum System Requirements • Active ADSL2+ service • Computer with an 10 Mbps or 10/100/1000 Mbps Ethernet connection • Microsoft Windows 10, 8, 7; Mac OS OS X+ • TCP/IP network protocol installed on each computer Features • ADSL2+, VDSL2, G.fast, and Fiber in a single CPE • Dual Band WiFi delivering up to 2.
Telus T3200M Gateway Getting to Know the Gateway This section contains a quick description of the Gateway’s lights, ports, and other features. The Gateway has several indicator lights (LEDs) and a button on its front panel, and a series of ports and switches on its rear panel. Front Panel The front panel of the Gateway features 2 LEDs (WAN and Wireless), and a WPS (Wireless Protected Setup) button. WAN LED The WAN LED illuminates when the Gateway is properly connected to a WAN Internet connection.
Introduction Rear Panel The rear panel of the Gateway features 14 ports, and a Reset button. Power Port The Power port is used to connect the Power cord (Model No. NBS40C120300VU, made by NetBit, or Model No. CDS036-W120U, made by Actiontec) to the Gateway. Reset Button Depressing the Reset button for 10 seconds will restore the Gateway’s factory default settings. The reset process will start after releasing the button.
Telus T3200M Gateway Coax Port The Coax port is used to connect the Gateway to a coaxial connection via coaxial (MoCA) cable. SFP Cage The SFP cage is used to connect the Gateway to a service provider connection via optical fiber cable. WAN Ethernet Port The WAN Ethernet port is used to connect the Gateway to a WAN connection via an Ethernet cable. LAN Ethernet Ports (4) The LAN Ethernet ports are used to connect computers to the Gateway via Ethernet cable.
Introduction Connecting the Gateway There are many variables involved when connecting the Gateway, depending on the type of Internet service available. The figure below shows all of the possible connections available for the Gateway. Connecting a Computer to the Gateway To connect a computer to the Gateway to access the Gateway’s graphical user interface (GUI): 1. Get the Gateway and black Power cord from the box. 2.
Telus T3200M Gateway 5. Make sure the computer is powered on, then plug the other end of the yellow Ethernet cable into an Ethernet port on the computer. 6. Make sure at least the LED on the LAN port into which the Ethernet cable is plugged steadily green. This may take a few moments. 7. The computer should either be configured with a statically defined IP address and DNS address, or instructed to automatically obtain an IP address using the Network DHCP server.
2 Accessing the Home Screen This chapter gives a short overview of the Home screen of the Gateway’s graphical user interface (GUI). Accessing the Home Screen To access the Home screen: 1. Open a Web browser on computer connected, via Ethernet cable, to one of the Gateway’s LAN ports. In the Address text box, type: http://192.168.1.254 then press Enter on the keyboard.
Telus T3200M Gateway 2. The Gateway’s Home screen appears. 3. Enter the username “admin” and the password found on the sticker on the back of the Gateway in the Username and Password text boxes at the top right side of the screen, then click Login. The Gateway’s GUI is now accessible.
Home Screen Icon Bar At the top of the Home screen is the Icon Bar. Here, you can quickly access the other four main sections of the Gateway’s GUI by clicking on the appropriate icon: Status (see chapter x for more details); Wireless Setup (see chapter x for more details); Firewall (see chapter x for more details); Advanced Setup(see chapter x for more details). Clicking Home in any other screen generates the Home screen.
Checking the Gateway’s Status This chapter explains the options available on the Status screens, which display information about the Gateway’s network connections. Accessing the Status Screens To access the Gateway’s Status screens: 1. Open a Web browser. In the Address text box, type: http://192.168.1.254 then press Enter on the keyboard. 2. The Gateway’s Main screen appears. Click the Status icon.
Status 3. The Connection Status screen appears. From here, all the Status screens can be accessed from the menu on the left. Connection Status Clicking Connection Status from any Status screen generates the Connection Status (see figure, above). Information concerning the devices connected to the Gateway’s network, whether wired or wireless, is displayed here, along with the connected device’s IP address, MAC address, and (if applicable) IPv6 address.
Telus T3200M Gateway xDSL Status Click xDSL Status from any Status screen to generate the xDSL Status screen. This screen displays the Gateway’s DSL connection parameters.
Status WAN Ethernet Click WAN Ethernet from any Status screen to generate the WAN Ethernet Status screen. This screen displays the Gateway’s WAN (wide access network) parameters. Routing Table Click Routing Table from any Status screen to generate the Routing Table screen. This screen displays the Gateway’s routes.
Telus T3200M Gateway Firewall Status Click Firewall Status from any Status screen to generate the Firewall Status screen. This screen displays parameters concerning the Gateway’s firewall. NAT Table Click NAT Table from any Status screen to generate the NAT Table screen. This screen displays the Gateway’s WAN (wide access network) parameters.
Status Wireless Status Click Wireless Status from any Status screen to generate the WAN Ethernet Status screen. This screen displays the Gateway’s wireless network parameters.
Telus T3200M Gateway Wireless Status Click Advanced Wireless Statistics from the bottom of the Wireless Status screen to generate the Advanced Wireless Statistics screen. This screen displays the Gateway’s additional wireless network parameters. Wireless Monitor Click Modemstatus Wireless Monitor from the bottom of the Wireless Status screen to generate the Wireless Monitor screen. This screen displays parameters for the clients connected to the Gateway’s wireless network.
Status Modem Utilization Click Modem Utilization from any Status screen to generate the Modem Utilization screen. This screen displays statistics related to the Gateway’s modem operation.
Telus T3200M Gateway LAN Status Click LAN Status from any Status screen to generate the LAN Status screen. This screen displays the Gateway’s LAN (local area network) parameters. ARP Table Click ARP Table from any Status screen to generate the ARP Table screen. This screen displays the Gateway’s ARP (address resolution protocol) table.
Status Interface Statistics Click Interface Statistics from any Status screen to generate the Estimated Interface Statistics screen. This screen displays various statistics and parameters relating to the Gateway’s connection interfaces. Multicast Statistics Click Multicast Statistics from any Status screen to generate the Multicast Statistics screen. This screen displays the Gateway’s multicast statistics.
Telus T3200M Gateway System Log Click System Log from any Status screen to generate the System Log screen. This screen displays the Gateway’s system log, which keeps track of all events that occur on the Gateway.
Configuring Wireless Settings 4 This chapter explains the options provided in the Wireless Settings section of the Gateway’s firmware, including basic and advanced settings, and WPS. Accessing Wireless Settings To access the Wireless Settings screens: 1. Open a Web browser. In the Address text box, type: http://192.168.1.254 then press Enter on the keyboard.
Telus T3200M Gateway 2. The Gateway’s Main screen appears. Enter the user name and password, then click Wireless Settings from the row of icons at the top of the screen. 3. The Wireless Status screen appears, with a menu of other wireless options listed on the left side of the screen. Basic Settings Click Basic Settings from any Wireless Settings screen to generate the Basic Settings screen, as shown in the figure above.
Wireless Advanced Settings Click Advanced Settings from any Wireless Settings screen to generate the Advanced Settings screen. This screen displays a series of settings relating to the advanced capabilities of the Gateway’s wireless network, including compatibility mode, channel width, and WMM power save.
Telus T3200M Gateway WPS Click WPS from any Wireless Settings screen to generate the WPS (Wi-Fi Protected Setup) screen, which allows the user to configure WPS by following the onscreen instructions.
Telus T3200M Gateway MAC Address Control Click MAC Address Control from any Wireless Settings screen to generate the Wireless MAC Authentication screen, which allows the user to configure allow or deny access to the Gateway’s wireless network using the MAC address of the wireless device. Follow the onscreen instructions to configure.
Wireless WDS Click WDS from any Wireless Settings screen to generate the WDS Wireless Distribution System screen, which allows the user to configure the Gateway to allow wireless connections between access points. Follow the onscreen instructions to configure.
Configuring Firewall Settings 5 This chapter explains the options provided in the Firewall section of the Gateway’s firmware, including setting up port forwarding and static NAT. Accessing Firewall Settings To access the Firewall screens: 1. Open a Web browser. In the Address text box, type: http://192.168.1.254 then press Enter on the keyboard. The Gateway’s Home screen appears. Click the Firewall icon.
Telus T3200M Gateway 2. The Firewall screen appears, with a menu of other wireless options listed on the left side of the screen. Firewall Click General from any Firewall Settings screen to generate the Firewall screen, as shown in the figure above. To set up, follow the onscreen instructions.
Firewall IPv6 Firewall Click IPv6 Firewall from any Firewall Settings screen to generate the IPv6 Firewall screen. To set up, follow the onscreen instructions.
Telus T3200M Gateway Port Forwarding Click Port Forwarding from any Firewall screen to generate the Port Forwarding screen. Activating port forwarding allows the network to be exposed to the Internet in certain limited and controlled ways, enabling some applications to work from the local network (game, voice, and chat applications, for example), as well as allowing Internet access to servers in the local network. This screen allows you to configure the port forwarding settings of the Gateway.
Firewall Applications Click Applications from any Firewall screen to generate the Applications screen. This screen allows the user to designate certain applications to be forwarded, circumventing the usual firewall security settings. If changes are made in this screen, click Apply at the bottom of the screen to save them.
Telus T3200M Gateway DMZ Hosting Click DMZ Hosting from any Firewall screen to generate the DMZ Hosting screen. The DMZ host feature allows one device on the network to operate outside the firewall to use an Internet service that otherwise would be blocked, or to expose a networked device to all services without restriction or security. To activate, click in the Enable radio button, then enter the device’s IP address in the appropriate text boxes.
Firewall IPv6 DMZ Hosting Click IPv6 DMZ Hosting from any Firewall screen to generate the IPv6 DMZ Hosting screen. The DMZ host feature allows one device on the network to operate outside the firewall to use an Internet service that otherwise would be blocked, or to expose a networked device to all services without restriction or security. To activate, follow the onscreen instructions. Caution! A DMZ host is not protected by the firewall and may be vulnerable to attack.
Telus T3200M Gateway UPnP Click UPnP from any Firewall screen to generate the UPnP screen, which activates UPnP (Universal Plug and Play). To activated, click in the Enable radio button, then click Apply.
Advanced Settings 6 This chapter explains the options available with the Advanced Setup screens, which configure some of the more complex settings on the Gateway. Accessing the Advanced Setup Screens To access the Gateway’s Advanced Setup screens: 1. Open a Web browser. In the Address text box, type: http://192.168.1.254 then press Enter on the keyboard. 2. The Gateway’s Main screen appears. Click the Advanced Setup icon.
Telus T3200M Gateway 3. The Services Blocking screen appears. From here, all the Advanced Setup screens can be accessed from the menu on the left. Services Blocking Click Services Blocking from any Advanced Setup screen to generate the Services Blocking screen (see the figure, above). This feature allows the user to block certain services from accessing the Gateway’s network(s). Follow the onscreen instructions to configure.
Advanced Website Blocking Click Website Blocking from any Advanced Setup screen to generate the Website Blocking screen. This feature allows the user to block certain websites from accessing the Gateway’s network(s). Follow the onscreen instructions to configure. Scheduling Access Click Scheduling Access from any Advanced Setup screen to generate the Scheduling Access screen. This feature allows the user to schedule access to the Gateway’s network(s) for certain devices.
Telus T3200M Gateway WAN IP Addressing Click WAN IP Addressing from any Advanced Setup screen to generate the WAN IP Address screen. This feature allows the user to set the protocol used by the ISP for Internet access. Follow the onscreen instructions to configure.
Advanced IPv6 WAN Settings Click IPv6 WAN Settings from any Advanced Setup screen to generate the IPv6 WAN Settings screen. This feature allows the user to set the IPv6 protocol used by the ISP for Internet access. Follow the onscreen instructions to configure.
Telus T3200M Gateway LAN IP Settings Click LAN IP Settings from any Advanced Setup screen to generate the LAN IP and DHCP Settings screen. This feature allows the user to set LAN IP and DHCP server settings on the Gateway. Follow the onscreen instructions to configure.
Advanced IPv6 LAN Settings Click IPv6 LAN Settings from any Advanced Setup screen to generate the IPv6 LAN Settings screen. This feature allows the user to set the IPv6 LAN IP settings on the Gateway. Follow the onscreen instructions to configure. DHCP Reservation Click DHCP Reservation from any Advanced Setup screen to generate the DHCP Reservation screen. This feature allows the user to lease a permanent DHCPallocated address to a client on the Gateway’s network.
Telus T3200M Gateway Dynamic DNS Click Dynamic DNS from any Advanced Setup screen to generate the Dynamic DNS screen. This feature allows the user to associate the WAN IP address of the Gateway with a host name. Follow the onscreen instructions to configure.
Advanced DNS Host Mapping Click DNS Host Mapping from any Advanced Setup screen to generate the Dynamic DNS screen. This feature allows the user to create a static host name for a specified IP address. Follow the onscreen instructions to configure. Port Bridging Click Port Bridging from any Advanced Setup screen to generate the Port Bridging screen. This feature allows the user to create a port bridge on the Gateway. Follow the onscreen instructions to configure.
Telus T3200M Gateway Admin Password Click Admin Password from any Advanced Setup screen to generate the Admin Password screen. This feature allows the user to change the password for accessing the Gateway’s graphical user interface. Follow the onscreen instructions to configure. Storage Device Info Click Storage Device Info from any Advanced Setup screen to generate the Storage Service screen. This feature allows storage devices connected to the Gateway to be easily accessed.
Advanced Samba Configuration Click Samba Configuration from any Advanced Setup screen to generate the Samba Configuration screen. This feature allows the user to set up a Samba environment. Follow the onscreen instructions to configure. Voice Advanced Setting Click Voice Advanced Setting from any Advanced Setup screen to generate the Service VoIP - Advanced screen. This feature allows the user to configure advanced VoIP settings on the Gateway. Follow the onscreen instructions to configure.
Telus T3200M Gateway Voice Basic Setting Click Voice Basic Setting from any Advanced Setup screen to generate the Service VoIP - Basic screen. This feature allows the user to configure basic VoIP settings on the Gateway. Follow the onscreen instructions to configure.
Advanced Voice Debug Setting Click Voice Debug Setting from any Advanced Setup screen to generate the Service VoIP - Debug screen. This feature allows the user to configure VoIP debug settings on the Gateway. Follow the onscreen instructions to configure. Reboot Click Reboot from any Advanced Setup screen to generate the Reboot screen. Reboot the Gateway by clicking Reboot.
Telus T3200M Gateway Restore Defaults Click Restore Defaults from any Advanced Setup screen to generate the Restore Defaults screen. To restore certain settings on the Gateway, click the appropriate Restore button. Check for New Firmware Click Check for New Firmware Link from any Advanced Setup screen to generate the Upgrade Firmware from Internet screen. Follow the onscreen instructions to upgrade the firmware on the Gateway.
Advanced Speed Test Click Speed Test from any Advanced Setup screen to generate the Speed Test screen. This screen allows the user to perform a speed test on the Gateway’s Internet (or WAN) connection. Enter the URL for a speed test site, then click Test.
Telus T3200M Gateway Ping Test Click Ping Test from any Advanced Setup screen to generate the Ping Test screen. To perform a ping test on the Gateway, follow the onscreen instructions.
Advanced Tcpdump Debug Click Tcpdump Debug from any Advanced Setup screen to generate the Tcpdump Debug screen. To perform a tcpdump debug on the Gateway, follow the onscreen instructions.
Telus T3200M Gateway Iperf Test Click Iperf Test from any Advanced Setup screen to generate the Iperf Test screen. To perform an iperf test on the Gateway, follow the onscreen instructions.
Advanced IPv6 Ping Test Click IPv6 Ping Test from any Advanced Setup screen to generate the IPv6 PingTest screen. To perform an IPv6 ping test on the Gateway, follow the onscreen instructions.
Telus T3200M Gateway Traceroute Click Traceroute from any Advanced Setup screen to generate the Traceroute screen. To perform an route trace on the Gateway, follow the onscreen instructions. IPv6 Traceroute Click IPv6 Traceroute from any Advanced Setup screen to generate the IPv6 Traceroute screen. To perform an IPv6 route trace on the Gateway, follow the onscreen instructions.
Advanced Time Zone Click Time Zone from any Advanced Setup screen to generate the Time Zone screen. Use this screen to set the time zone on the Gateway. Language Settings Click Language Settings from any Advanced Setup screen to generate the Language Settings screen. Use this screen to set the language on the Gateway’s graphical user interface.
Telus T3200M Gateway DNS Cache Click DNS Cache from any Advanced Setup screen to generate the DNS Cache screen. Use this screen to set up a DNS cache on the Gateway. IGMP Setting Click IGMP Setting from any Advanced Setup screen to generate the IGMP Setting screen. Use this screen to set up IGMP processes on the Gateway.
Advanced Upgrade History Click Upgrade History from any Advanced Setup screen to generate the Upgrade History screen. This screen displays a list of firmware upgrades applied to the Gateway. SIP ALG Click SIP ALG from any Advanced Setup screen to generate the SIP ALG screen. This screen allows the user to configure SIP ALG on the Gateway.
Telus T3200M Gateway Tool Box Click Tool Box from any Advanced Setup screen to generate the Tool Box screen. This screen allows the user to configure traffic and port mirroring on the Gateway. DLNA Click DLNA from any Advanced Setup screen to generate the DLNA screen. This screen allows the user to configure DLNA settings on the Gateway.
Advanced xDSL Diagnostics Click xDSL diagnostics from any Advanced Setup screen to generate the DLNA screen. This screen allows the user to select a type of diagnostics on the Gateway. User’s Manual Click xDSL diagnostics from any Advanced Setup screen to view the Gateway’s user manual.
A Specifications General Model Number(s) T3200M (Wireless 11ac Bonded VDSL2 Modem Gateway with MoCA 2.0) Standards IEEE 802.3 (10BaseT) IEEE 802.3u (100BaseTX) IEEE 802.11 b, g, n (Wireless) G.dmt G.lite t1.413 RFC 1483, 2364, 2516 Protocol LAN - CSMA/CD WAN - PPP, DHCP, Static IP WAN VDSL2 interface LAN 10/100/1000 RJ-45 switched ports Speed LAN Ethernet: 10/100/1000 Mbps auto-sensing Wireless: 802.
Specifications Wireless Operating Range Indoors Up to 91M (300 ft.) @ 300 Mbps Outdoors Up to 457M (1500 ft.) @ 300 Mbps Topology Star (Ethernet) LED Indicators WAN, Wireless, and WPS Push Button Power Adapter This device is supplied with one of two power adapters: Adapter 1 Model No. - NBS40C120300VU Input - 100-240V~, 50/60Hz, 1.0A Output - 12.0V === 3.0A Manufacturer - NetBit Adapter 2 Model No. - CDS036-W120U Input - 100-240V~, 50/60Hz, 1.0A Output - 12.0V === 3.
Telus T3200M Gateway Environmental Power External, 12V DC, 3 A Certifications FCC Class B, FCC Class C (part 15, 68), CE Mark Commercial, UL Operating Temperature 0º C to 45º C (32ºF to 113ºF) Storage Temperature -20ºC to 70ºC (-4ºF to 158ºF) Operating Humidity 10% to 85% non-condensing Storage Humidity 5% to 90% non-condensing 66
Notices Warranty This product has a one-year Limited Hardware Warranty and 90-day free software updates from date of purchase. Local Law This Limited Warranty Statement gives the customer specific legal rights. The customer may also have other rights, which vary from state to state in the United States, and from country to country elsewhere in the world.
Notices Coaxial Cable If applicable, the coaxial cable screen shield needs to be connected to the Earth at the building entrance per ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, “Grounding of Outer Conductive Shield of a Coaxial Cable,” or in accordance with local regulation. FCC Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Notices Declaration of Conformity for Products Marked With the FCC Logo This device complies with part 15 of the FCC. Operation is subject to the following two conditions: 1. This device may not cause harmful interference; 2. This device must accept any interference received, including interference that may cause undesired operation of the device. Important Note on Wi-Fi If applicable, this equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Telus T3200M Gateway Contact Info For questions regarding your product or the FCC declaration, contact: Actiontec Electronics, Inc 760 North Mary Avenue, Sunnyvale, CA 94085, United States Tel: (408) 752-7700 Fax: (408) 541-9003 70
