User's Manual

56
4. The receiver reboots, and new settings take effect after the reboot.
5.3.27. Modifying the Receiver’s Wireless Network Name (SSID)
When AGO is disabled, you can modify the receiver’s wireless network name (SSID).
Follow the procedure below to modify the receiver’s SSID:
1. Go to the Network Settings tab page by clicking the Network Settings tab.
2. Go to the Wireless Network Name (SSID) and Wireless Network Password section,
and type a new name in the Wireless Network Name (SSID) box and a new password
in Wireless Network Password box.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.