User's Manual

51
communication.
In a Wi-Fi P2P group, the group owner operates as an access point and all other devices are
clients. After AGO is enabled, the receiver will work as the P2P group owner.
To use the Managed Meetings (Intel® Pro WiDi) function, AGO must be enabled.
Follow the procedure below to set up the receiver’s AGO:
1. Go to the Network Settings tab page by clicking the Network Settings tab.
2. Set the Autonomous Group Owner (AGO) to Enable or Disable.
There are two options: Enable and Disable.
l Enable: The receiver will become the group owner of the session. The communication
channel can be defined by the receiver. And the Managed Meetings feature is available.
l Disable: The communication channel will be consistent with the source device, or be
determined through negotiation between the receiver and the connecting device. And
the Managed Meetings feature is not available.
Note: By default, AGO is enabled.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
4. The receiver reboots, and new settings take effect after the reboot.
5.3.23. Setting up Communication Channel
When AGO is enabled, you can define a channel for communication between the wireless
display receiver and the source device.
Follow the procedure below to set up the receiver’s communication channel: