User's Manual

38
2. To enable or disable the receiver’s Moderated mode for Managed Meetings, set the
Managed Meetings Modes Disabled feature to Nothing is disabled or Moderated
mode is disabled, respectively.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
4. The receiver reboots, and new settings take effect after the reboot.
5.3.8. Setting up PIN Pairing Method
For security purpose, you may be required to connect to ScreenBeam Pro with a PIN. You
can define the PIN pairing method in the local management page.
Follow the procedure below to set up the receiver’s PIN pairing methods:
1. Go to the Features tab page by clicking the Features tab.
2. Set the Force PIN Pairing on First Connection feature to On or Off.
l Select "Off" to disable the PIN enforcement function. PIN entry or PBC is used
when connecting your device to the receiver for the first time.
l Select "On" to enable the PIN enforcement function. In this case, you must enter a
PIN code on the device connecting to the receiver for the first time. When this
function is enabled, the system provides two PIN generation methods: Random
and Static.
Note: Some wireless display source devices do not support PIN entry and may not