User's Manual

25
3. The web server login interface appears. Type the username and password in the
Username and Password boxes and click the Login button.
Note:
l By default, the Username is “Administrator” and Password is “WiDi”. You can modify
the username and password in the local management web page. Refer to Section 5.3.2.
Setting up Login Username and Password for the Local Management for detail.
l The username and password are case sensitive.
l When Autonomous GO is enabled, the SSID of the receiver is reserved.
5.1.2. When Autonomous GO is Disabled
When Autonomous GO is disabled, you must connect your device to the receiver’s SSID,
and then access the URL address (it is "https://192.168.51.1" by default) with a web
browser.
Note: You can set the receiver’s network information to be displayed on the Ready to
connect screen. Refer to Section 5.3.21. Setting up Network Information Display on TV
Screen for detail.
There are two situations: when the SSID broadcast is enabled and when it is disabled.
5.1.2.1. When SSID Broadcast is Disabled
Follow the procedure below to log into the local management web server:
1. You can find the receiver’s SSID in the lower part of the Ready to connect screen.