Wireless Display Receiver Model# SBWD950A Installation Guide This Installation Guide will walk you through the easy steps to set up your ScreenBeam Pro Wireless Display Receiver Enterprise Edition. During this process, we’ll show you how to A B1 B2 B3 C D Install the Receiver Connect Using Windows 8.
Meeting ScreenBeam Pro Ethernet: connects to ScreenBeam Central Management System via Ethernet for receiver management HDMI Out: connects to HDTV/projector with an HDMI port for video and audio output Power: for power supply Reset: resets system to defaults LED Indicator: indicates power supply status USB: for configuring CMS connection data, firmware update, and USB control VGA Out: connects to HDTV/projector with a VGA port for video output VGA In: VGA input for VGA bypass
Welcome! Thank you for your purchase of a ScreenBeam Pro Wireless Display Receiver - Enterprise Edition (hereinafter referred to as the Receiver). The Receiver connects to your Intel WiDi or Miracast-capable device wirelessly, and displays the device’s screen on your HDTV. A Install the Receiver 1 Step Get the Receiver, power adapter, and HDMI cable or VGA cable from the Receiver’s box.
Turn on your TV and switch the input source until Step you see the Ready To Connect screen.
The Receiver is now connected to your HDTV. Proceed to one of the next three sections of this Guide (depending on the device you are using to connect to the Receiver) to finish the connection procedure. For Windows 8.1 devices, please proceed to section B1; For Windows 7/8 devices, please proceed to section B2; For Android devices, please proceed to section B3. B1 Connect Using Windows 8.1 or Higher 1 From the Windows desktop, Step navigate to the Charms menu and select Devices.
3 Step From the Project screen, select Add a wireless display. 4 Step Select the ScreenBeam Receiver from the list. 5 Step Enter the PIN displayed on the television screen, then connect and display. Note: If you are running Windows 8.1 and the screens above do not appear, go to http://www.actiontec.com/widi81 for the latest software updates.
B2 Connect Using Intel WiDi App (Gen 5) Step 1 Find the Intel Wireless Display application on the device and launch it. To find the application, go to Windows Search on your device and search for “Intel WiDi” in your apps. 2 The device scans for Step available receivers. Select your receiver on the list to connect to the receiver. Step 3 A PIN and the host name of the connecting device are displayed. Enter the PIN in the PIN entry box on the WiDi device, and click Continue.
4 Step The HDTV displays messages to show the status of the connection process. Step 5 Your device will connect to the receiver, and the device’s screen will be displayed on the HDTV. Note: Connection using Intel WiDi (4.x.x.x) is available when the receiver’s AGO feature is disabled. Connection procedure is similar.
B3 Connect Using Miracast-enabled Device You can connect to the Receiver from a Miracast-enabled Android device, such as a smartphone, tablet, or game console (find the wireless display feature in Settings). Also, the device should be running the latest software for best performance. Step 1 On a Miracast-enabled Android device, locate and open the Wireless Display Application. Note: The name of the Wireless Display Application depends on the device type and model.
Switch Display Modes The Receiver supports three display modes when connected with a compatible wireless display application (Intel WiDi or Windows 8.1 Project, for example). In Windows, press the Windows logo + P keys simultaneously ( + P) to launch the display options and select the desired display mode from the options. Windows 8.
Device Management The receiver’s local management console provides the ability to manage the receiver’s settings. Log into the IT Management Console When AGO is enabled (it is enabled by defualt), follow the procedure below to log into the IT Management Console: Step Connect your device to the receiver. 1 Note: You must connect your device to the receiver. Otherwise, you cannot access the URL in Step 2. 2 Step Access the URL address (http://192.168.16.1) with a web browser on your device.
Device Management (continued) Log into the IT Management Console (continued) Note: By default, the Username is “Administrator” and Password is “WiDi”. The username and password are case sensitive. Setting up Network Information Display on TV Screen Step Go to the Network Settings tab page, and set the Show network information on TV screen feature to Enable or Disable. 1 Note: By default, this feature is disabled. In this case, the network information is not displayed.
Device Management (continued) Setting up Managed Meetings Step Go to the Features tab page, and set the Managed Meetings feature to Enable or Disable. 1 2 Step For better communication, you can define a port (Managed Meetings Port) for the Managed Meetings. 3 Click the “Apply” button to save your settings.
Device Management (continued) Setting up Autonomous Group Owner (AGO) Step Go to the Network Settings tab page, and set the Autonomous Group Owner (AGO) feature to Enable or Disable. 1 Enable: The receiver will become the group owner of the session. The communication channel can be defined by the receiver. And the Managed Meetings feature is available.
Device Management (continued) Setting up Communication Channel Step Go to the Network Settings tab page, and select a desired communication channel from the Channel Number box. 1 You should select a channel based on your network environment. Generally, cleaner channels (where less devices work) will provide better performance. You can use Wi-Fi Analyzer to help you identify a clean channel. Step Click the “Apply” button to save your settings.
Device Management (continued) Setting up PIN Pairing Method (continued) Select “Off” to disable the PIN enforcement function. PIN entry or PBC is required when connecting your device to the receiver for the first time. Select “On” to enable the PIN enforcement function. In this case, you must enter a PIN code on the device connecting to the receiver for the first time. When this function is enabled, the system provides two PIN generation methods: Random and Static.
Device Management (continued) Managing HDMI/VGA Port Output Step Go to the Features tab page, and select the desired option in the HDMI/VGA Port Power management dropdown box. There are three options: Always On, Screensaver, and HDMI Off. 1 Always On: Selecting this option, the HDMI output is always on. Screensaver: Selecting this option, the system will run the screensaver after the defined idle time expires. Users can define the idle time (5-9999 seconds) in the Wait time box.
Device Management (continued) Setting up the Receiver’s TCP/IP Settings Step Go to the TCP/IP Setting section in the Remote Management tab page, and set the IP Policy to Auto or Static. 1 Auto: The receiver will be assigned an IP address by the DHCP server. Static: You can define the IP address, subnet mask, and default gateway for the receiver. If you select Static, you need to define a DNS server, too. 2 Click the “Apply” button to save your settings.
Device Management (continued) Setting up Wireless Connection Properties Step Go to the Wireless Connection Property Settings section in the Remote Management tab page, and select a desired Security Type and provide correct information for relevant items. 1 Note: Available security types are Open, Shared, WPA-PSK[TKIP], WPA2-PSK[AES], WPA-PSK[TKIP]+WPA2-PSK[AES], PEAP/ MSCHAPV2, and EAP-TLS. 2 Step Click the Connect button, and then the adapter will connect to the wireless router (AP).
Device Management (continued) Defining a DNS Server for the Receiver Step Go to the TCP/IP Setting section on the Remote Management tab page, and set the DNS Policy to Auto or Static. 1 Auto: The receiver will be assigned a DNS server automatically. Static: You can define a DNS server for the receiver. 2 Click the “Apply” button to save your settings.
Device Management (continued) Defining a ScreenBeam CMS for the Receiver Step Go to the Central Management System Settings section on the Remote Management tab page, and define the CMS Host and the CMS Port. CMS Host: It is the IP address or the FQDN/hostname/ domain name/alias name (if you have properly configured the DNS server and the DHCP server) of the server that hosts the ScreenBeam CMS. It supports a domain with six labels at most. CMS Port: It is the port number for CMS communication.
FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IC warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
