User's Manual

Device Management (continued)
Step
5 The Manually connect to a wire-
less network window appears. Type in or
select the following information.
Network name: The SSID of the Screen-
Beam receiver you wish to connect to.
Security type: WPA2 Personal
Encryption type: AES
Security key: 12345678 (default)
Step
6 Check Start this connection automatically if you
want to automatically connect to this wireless network when
it is in range.
Step
7 Check Connect even if the network is not broadcast-
ing. Click Next.
Step
8 The receiver’s SSID will be added successfully. Click
Close. Your device will connect to the SSID automatically.
Step
9 An URL (it is “http://192.168.51.1” in this example) is
displayed on the connected display.