Mini Wireless Display Receiver Model# SBWD700A Installation Guide This Installation Guide will walk you through the easy steps to set up your ScreenBeamEnterprise Wireless Display Receiver. During this process, we’ll show you how to : A B1 B2 B3 C D Install the Receiver Connect Using Windows 8.
Meeting ScreenBeam Enterprise LED Indicator: indicates power supply status USB port: for configuring MGT connection data VGA In: reserved On/Off: the power switch VGA Out: connects to HDTV/projector with a VGA port for video output HDMI Out: connects to HDTV/projector with an HDMI port for video and audio output Ethernet: Connects to Ethernet for receiver management with ScreenBeam Central Management System Reset Button: resets system to defaults DC IN: for power supply
Welcome! Thank you for your purchase of a ScreenBeam Enterprise Wireless Display Receiver (hereinafter referred to as the Receiver). The Receiver connects to your Intel WiDi or Miracast-capable device wirelessly, and displays the device’s screen on your HDTV. A Install the Receiver 1 Step Get the Receiver, power adapter, and HDMI cable or VGA cable from the Receiver’s box.
5 Turn on your TV and switch the input source until Step you see the Ready To Connect screen.
The Receiver is now connected to your HDTV. Proceed to one of the next three sections of this Guide (depending on the device you are using to connect to the Receiver) to finish the connection procedure. For Windows 8.1 devices, please proceed to section B1; For Windows 7/8 devices, please proceed to section B2; For Android devices, please proceed to section B3. B1 Connect Using Windows 8.1 or Higher 1 From the Windows desktop, Step navigate to the Charms menu and select Devices.
3 Step From the Project screen, select Add a wireless display. 4 Step Select the ScreenBeam Receiver from the list. 5 Step Enter the PIN provided by your system administrator (or the one displayed on the television screen), then connect and display. Note: The PIN for connection is “12345670” by default if no PIN is displayed. Note: If you are running Windows 8.1 and the screens above do not appear, go to http://www.actiontec.com/widi81 for the latest software updates.
B2 Connect Using Intel WiDi App 1 Step Find the Intel Wireless Display application on the device and launch it. To find the application, go to Windows Search on your device and search for “Intel WiDi” in your apps. 2 The device scans for Step available receivers. Select your receiver on the list and click Connect. (The Connect Automatically checkbox is optional.
4 Step The HDTV displays messages to show the status of the connection process. 5 Step A Connection Successful screen appears on your device’s screen, as well as on the HDTV. Display Tip: If the edges of the device screen cannot be seen on the HDTV, adjust cropping. To do this, enter the WiDi application and click Settings. Navigate to the “Picture and Sound” section, click Adjust cropping…, and adjust the HDTV picture by clicking plus (+) or minus (-).
B3 Connect Using Miracast-enabled Device You can connect to the Receiver from a Miracast-enabled Android device, such as a smartphone, tablet, or game console (find the wireless display feature in Settings). Also, the device should be running the latest software for best performance. Step 1 On a Miracast-enabled Android device, locate and open the Wireless Display Application. Note: The name of the Wireless Display Application depends on the device type and model.
Switch Display Modes The Receiver supports three display modes when connected with a compatible wireless display application (Intel WiDi or Windows 8.1 Project, for example). In Windows, press the Windows logo + P keys simultaneously ( + P) to launch the display options and select the desired display mode from the options. Windows 8.
Device Management The device management webpage provides the ability to manage the receiver’s settings. Log into the IT Management Console Step Find the receiver’s SSID in the lower left corner of the Ready To Connect screen. 1 2 Step Right-click the WiFi network icon on the taskbar of your device and select Open Network and Sharing Center. 3 Step The Network and Sharing Center window appears. Click Set up a new connection or network. 4 Step The Set up a new connection or network window appears.
Device Management (continued) 5 Step The Manually connect to a wireless network window appears. Type in or select the following information. Network name: The SSID of the ScreenBeam receiver you wish to connect to. Security type: WPA2 Personal Encryption type: AES Security key: 12345678 (default) 6 Step Check Start this connection automatically if you want to automatically connect to this wireless network when it is in range. 7 Step Check Connect even if the network is not broadcasting. Click Next.
Device Management (continued) 10 Step Access the URL address (“http://192.168.51.1” in this example) with a web browser on the laptop. 11 Step The web server login interface appears. Type the username and password in the Username and Password boxes and click the Login button. Note: By default, the Username is “Administrator” and Password is “Actiontec”. The username and password are case sensitive.
Device Management (continued) Setting up PIN Pairing Method (continued) Select “Off” to disable the PIN enforcement function. PIN entry or PBC is required when connecting your device to the receiver for the first time. Select “On” to enable the PIN enforcement function. In this case, you must enter a PIN code on the device connecting to the receiver for the first time. When this function is enabled, the system provides two PIN generation methods: Random and Static.
Device Management (continued) Managing HDMI Port Output Step Go to the Features tab page, and select the desired option in the HDMI Port Power management drop-down box. There are three options: Always On, Screensaver, and HDMI Off. 1 Always On: Selecting this option, the HDMI output is always on. Screensaver: Selecting this option, the system will run the screensaver after the defined idle time expires. Users can define the idle time (5-9999 seconds) in the Wait time box.
Device Management (continued) Modifying the Receiver’s SSID Step Go to the Wireless Network Settings tab page, and type a new name in the Network Name (SSID) box and a new password in Network Password box. 1 Step 2 Click the “Apply” button to save your settings. Setting up Broadcast LMI Beacon Step Go to the Wireless Network Settings tab page, and set the Broadcast LMI Beacon feature to Enable or Disable. By default, the Broadcast LMI Beacon feature is disabled.
Device Management (continued) Modifying the Receiver’s Ethernet Settings Step Go to the Ethernet Interface Setting section on the Ethernet Network Settings tab page, and set the IP Policy to Auto or Static. Auto: The receiver will be assigned an IP address by the DHCP server. Static: You can define the IP address, subnet mask, and default gateway for the receiver. If you select Static, you must define a DNS server. 1 Step 2 Click the “Apply” button to save your settings.
Device Management (continued) Defining a DNS Server for the Receiver Step Go to the Ethernet Interface Setting section on the Ethernet Network Settings tab page, and set the DNS Policy to Auto or Static. Auto: The receiver will be assigned a DNS server automatically. Static: You can define a DNS server for the receiver. 1 Step 2 Click the “Apply” button to save your settings.
Device Management (continued) Defining the SCMS Server (MGT Server) for the Receiver Step Go to the Remote Management Server (MGT) Setting section on the Ethernet Network Settings tab page, and define the MGT Host and the MGT Port. MGT Host: It is the IP address/host name/domain name of the server that hosts the SCMS server. A DNS server and a DHCP server are receommended. MGT Port: It is the port number of the SCMS server. 1 Step 2 Click the “Apply” button to save your settings.
C Product Support & Additional Information Go to http://international.actiontec.
C Specifications Language: English, French, German, Italian, Japanese, Simplified Chinese, Traditional Chinese, Russian, and Spanish A/V Interface: HDMI output (Type-A male connector), VGA input, and VGA output Video Output: up to full HD 1080p30 (H.264) Audio Output: up to 5.1 surround sound Data port: USB 2.0 (Type A) Ethernet: RJ-45, 10/100 Mbps Firmware Upgrade: Wireless upgrade Wireless: IEEE 802.11a/b/g/n, dual-band 2.4 GHz and 5 GHz Operation Frequency: 2.
C Specifications (continued) LED Indicator: Power On Dimensions: 7.66 x 4.70 x 1.40 inch (194.5 x 119.5 x 35.5mm) Certification: Wi-Fi Miracast™, Intel® WiDi Regulatory Compliance: ? Warranty: Localized to country of sale System Requirements An HDTV/projector with one HDMI port (Type A) or one VGA port available Supported Devices - Intel WiDi laptops: Ultrabooks and laptops with Intel WiDi 3.5 or higher - Wi-Fi Miracast capable devices: smartphones, tablets, and laptops with Wi-Fi Miracast • Windows 8.
FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
