Mini Wireless Display Receiver Model# SBWD60A Installation Guide This Installation Guide will walk you through the easy steps to set up your ScreenBeam Mini 2 Wireless Display Receiver. During this process, we’ll show you how to : A B1 B2 B3 C D Install the Receiver Connect Using Windows 8.
Welcome! Thank you for your purchase of a ScreenBeam Mini 2 Wireless Display Receiver (hereinafter referred to as the Receiver). The Receiver connects to your Intel WiDi or Miracast-capable device wirelessly, and displays the device’s screen on your HDTV. A Install the Receiver Step 1 Get the Receiver, power adapter, USB cable, and HDMI extension cable from the Receiver’s box. 2 Plug the small male connector of the USB cable to Step the Receiver’s micro USB port labeled “Power”.
5 Turn on your TV and switch the input source until Step you see the Ready To Connect screen. Note: If you cannot plug the Receiver into an HDMI port on your TV (due to other components, or a poorly accessible port), use the included HDMI extension cable to connect the Receiver.
The Receiver is now connected to your HDTV. Proceed to one of the next three sections of this Guide (depending on the device you are using to connect to the Receiver) to finish the connection procedure. For Windows 8.1 devices, please proceed to section B1; For Windows 7/8 devices, please proceed to section B2; For Android devices, please proceed to section B3. B1 Connect Using Windows 8.1 or Higher 1 From the Windows desktop, Step navigate to the Charms menu and select Devices.
3 Step From the Project screen, select Add a wireless display. 4 Step Select the ScreenBeam Receiver from the list. 5 Step Enter the PIN as displayed on the television screen, then connect and display. Note: If you are running Windows 8.1 and the screens above do not appear, go to http://www.actiontec.com/widi81 for the latest software updates.
B2 Connect Using Intel WiDi App 1 Step Find the Intel Wireless Display application on the device and launch it. To find the application, go to Windows Search on your device and search for “Intel WiDi” in your apps. 2 The device scans for Step available receivers. Select the same receiver name as seen on the HDTV and click Connect. (The Connect Automatically checkbox is optional.) Step 3 Wait until the Receiver displays a PIN on the HDTV, and a PIN entry box on the screen of the WiDi device.
4 Step The HDTV displays messages to show the status of the connection process. 5 Step A Connection Successful screen appears on your device’s screen, as well as on the HDTV. Display Tip: If the edges of the device screen cannot be seen on the HDTV, adjust cropping. To do this, enter the WiDi application and click Settings. Navigate to the “Picture and Sound” section, click Adjust cropping…, and adjust the HDTV picture by clicking plus (+) or minus (-).
B3 Connect Using Miracast-enabled Device You can connect to the Receiver from a Miracast-enabled Android device, such as a smartphone, tablet, or game console (find the wireless display feature in Settings). Also, the device should be running the latest software for best performance. Step 1 On a Miracast-enabled Android device, locate and open the Wireless Display Application. Note: The name of the Wireless Display Application depends on the device type and model.
Switch Display Modes The Receiver supports three display modes when connected with a compatible wireless display application (Intel WiDi or Windows 8.1 Project, for example). In Windows, press the Windows logo + P keys simultaneously ( + P) to launch the display options and select the desired display mode from the options. Windows 8.
C Install ScreenBeam Configuration Utility Actiontec’s ScreenBeam Configuration Utility allows configuring and upgrading ScreenBeam series receivers wirelessly. There are three versions available: Desktop, Metro, and Android. Access the following address to download ScreenBeam Configuration Utility for Desktop, Metro, or Android: http://www.actiontec.com/sbupdate For Windows 8.1 and Android devices, you can also install the Utility on Microsoft Store and Google Play Store, respectively.
General Regulatory and Compliance Notices Important Safety Instructions If applicable, when using electronic equipment, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and personal injury, including the following: • Do not use this product near water – for example, near a bathtub, kitchen sink, laundry tub, or swimming pool, or in a wet basement.
1.This device may not cause harmful interference; 2.This device must accept any interference received, including interference that may cause undesired operation of the device. Canadian Industry Regulations This product meets the applicable Industry Canada technical specifications. The Class [B] digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation.
Declarations of Conformity (DoC) To obtain the complete DoC form in softcopy, go to the Actiontec Electronics Declarations of Conformity EU/EEA website at http://international.actiontec.com/support/doc The symbol at right is placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive).
