User's Manual

ManualsBrandsActiontec Electronics ManualsElectronicsScreenBeam USB Transmitter

AWDTestEnvironmentSetupGuide



HardwareRequirement

 TVormonitorwithHDMIinterface

 Laptop:

CPU:intelCPUatleastCore2duo1.8gorAMDCPU

Ram:atleast2g

Wirelesscard:Realtek8192DUUSBdongle

OS:Win764bit



Softwarepackage(FilesincludedinthezipfileAWD_WIN7_TEST .zip)

 Folder“Driver_Installation”–driverofRealtek8192DU

 AWD.msi–AWDinstallationfile(version:2.0.18)

 install.img–firmwareimageofRx(version:0.5.7)

 vcredist_x64.exe–MicrosoftVisualC+ +2010Redistributablex64

 vcredist_x86.exe–MicrosoftVisualC+ +2010Redistributablex86



Testenvironmentsetupprocedure

 ConnectRx

1 UpgradeRxto0.5.7

1.1 PrepareaUSBstick,copyinstall.imgintorootandstickintoRx’sUSBport

1.2 ConnectRxtoaTVorMonitorviaHDMIinterface

1.3 Holdresetbuttonandthenpoweron,checktheScreentobelikethis,thenreleasereset

button



Summary of content (10 pages)

PAGE 1
AWD Test Environment Setup Guide Hardware Requirement   TV or monitor with HDMI interface Laptop: CPU: intel CPU at least Core 2 duo 1.8g or AMD CPU Ram: at least 2g Wireless card: Realtek 8192DU USB dongle OS: Win7 64 bit Software package(Files included in the zip file AWD_WIN7_TEST.zip)      Folder “Driver_Installation” – driver of Realtek 8192DU AWD.msi – AWD installation file (version: 2.0.18) install.img – firmware image of Rx (version: 0.5.7) vcredist_x64.
PAGE 2
1.4 Wait until upgrade process finish(DO NOT POWER OFF WHILE UPGRADING) 1.5 Rx will reboot automatically, wait until Ready to Connect screen. Check version on left‐bottom corner, should be 0.5.
PAGE 3
 1 Connect AWD Change Audio Setting 1.1 Right Click the speaker icon in the right‐left corner, then choose Playback devices 1.2 In Playback tab, find Speakers and Headphone, then click Properties 1.
PAGE 4
2 Install Microsoft Visual C++ 2010 Redistributable 2.1 Install Microsoft Visual C++ 2010 Redistributable x86 and x64 version 2.2 3 After finish, go to programs and features, check if it is installed correctly. Install Wireless USB dongle driver 3.1 Double click on Setup, then follow the instructions 3.
PAGE 5
3.3 4 After reboot, plug‐in the wireless USB dongle, and wait till it is ready to use. To check if it is installed correctly, go to Device manager, there should be a device Realtek RTL8192DU Wireless LAN 802.11n USB 2.0 Network Adapter in Network adapters, double click to open properties, check the Driver tab, the version should be 7015.12.817.2012 Install AWD 4.
PAGE 6
5 Connect AWD 5.1 PIN method (First time) 5.1.1 Click Add Device button 5.1.2 Pair window will appear, scan and list Rx. Click on Rx name and then click Connect 5.1.
PAGE 7
5.1.
PAGE 8
5.1.5 After finish, laptop screen will be displayed on TV 5.2 6 7 Persistent method Same as PIN method except entering PIN. There is no need to enter PIN Play a video clip repeatedly Disconnect AWD 7.1 Click on AWD icon, AWD main window will appear. Click Disconnect button. Click OK when prompted 7.2 AWD and Rx will return to the status, ready for next connection.
PAGE 9
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 10
procedures specified in OET Bulletin 65 Supplement C. This equipment should be installed and operated with minimum distance 0.5 cm between the radiator & your body.