User Manual

3. General feature list
Feature list
Descriptions
Target dimensions [mm]
80mm(L) x 60mm(W)
Signaling connection
RGMII connection over mPCIe connector
Antenna connection
4 antenna connections via U.FL connectors .
PCB
6 Layers
Chipset
QV840 (QT3840BC and QT2518B)
RF FEM
Microsemi LX5586H or Triquint TQP8080 (subject to change)
Band support
5GHz
Freq support
5180-5825MHz
BW
20MHz/40MHz/80MHz Mixed mode
Spatial Streams
Up to 4SS
Configuration and System
management
In-band or Web GUI
WPS
WPS input pin
Wi-Fi LED
Wi-Fi LED signal pin
WPS LED
WPS LED signal pin
Radio ON/OFF Control
Radio enable/disable pin
Factory reset
Factory reset to default input via mPCIe connector
Hard reset
Hardware reset input via mPCIe connector
UART
via mPCIe connector
DDR3 Memory
16bit – 128MB, 400MHz
SPI flash
64KB ( firmware downloaded via RGMII interface ) or 16MB
Calibration data storage
SPI flash
Power Source
via mPCIe connector, 3.3V-2.5A and optional 5V for FEM
Interoperability
Operates with 802.11a/n/ac clients/STA and AP
MIMO features
MU-MIMO, Tx Beamforming and LDPC
Security
WPA,WPA2
4. RF Specification
Items
Target Specification
Total max conductive output
power
24dBm with 3.3V
TX EVM at antenna port (Subject
to change for manufacturing)
+17dBm @3% EVM, HT40, MCS7
+15dBm @1.8% EVM , MCS9 (subject to change)
RX min. sensitivity (Subject to
change for manufacturing)
20MHz MCS0 -93dBm
20MHz MCS7 -75dBm
40MHz MCS0 -90dBm
40MHz MSC7 -72dBm