User's Manual

Connecting the Actiontec Wireless Cable/DSL RouterConnecting the Actiontec Wireless Cable/DSL Router
17
16
For Ethernet Connection:
1. Please start up your computer.
2. After your computer has started up, locate the blue Ethernet cable marked
"Ethernet cable". Connect the cable to the back of the Actiontec Wireless
Cable/DSL Router and then to your Computer, into the Ethernet slot.
3. Plug the Power Supply into a wall outlet, then plug the other end to the port
labeled “Power”, on the back of the Actiontec Wireless Cable/DSL Router.
The Actiontec Wireless Cable/DSL Router allows you to connect to your computer in
two (wired) ways, by USB cable or Ethernet cable, and wireless. Follow these instruc-
tions for the connection you choose:
For USB Connection:
1. Please start up your computer.
2. After your computer has started up, locate the USB Cable. Connect the square end to the
slot on the ActiontecWireless Cable/DSL Router labeled “USB”. On your PC, connect
the other, rectangular end to the appropriate USB slot.
3. Plug the Power Supply into a wall outlet, then plug the other end to the port
labeled “Power”, on the back of the Actiontec Wireless Cable/DSL Router.
Connecting the Actiontec Wireless Cable/DSL Router